WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance Type Physical Virtual #Pages Attr ConventionalMemory 000000000000 0 00004000 WC WT WB ConventionalMemory 000005400000 0 00032c00 WC WT WB BootServicesData 000038000000 0 00000020 WC WT WB ConventionalMemory 000038020000 0 000078e3 WC WT WB BootServicesData 00003f903000 0 00000020 WC WT WB BootServicesCode 00003f923000 0 00000046 WC WT WB BootServicesData 00003f969000 0 0000067d WC WT WB BootServicesCode 00003ffe6000 0 00000017 WC WT WB BootServicesData 00003fffd000 0 00000003 WC WT WB ConventionalMemory 000040000000 0 0006e601 WC WT WB LoaderData 0000ae601000 0 00008000 WC WT WB LoaderCode 0000b6601000 0 0000015f WC WT WB ACPIReclaimMemory 0000b6760000 0 00000010 WC WT WB ConventionalMemory 0000b6770000 0 00000003 WC WT WB LoaderData 0000b6773000 0 00000001 WC WT WB ConventionalMemory 0000b6774000 0 00006c92 WC WT WB BootServicesData 0000bd406000 0 00001c3a WC WT WB ConventionalMemory 0000bf040000 0 000004e7 WC WT WB BootServicesCode 0000bf527000 0 000002e9 WC WT WB RuntimeServicesCode 0000bf810000 bf810000 000003e0 WC WT WB RUNTIME ConventionalMemory 0000bfbf0000 0 000001c0 WC WT WB RuntimeServicesData 0000bfdb0000 bfdb0000 00000230 WC WT WB RUNTIME ConventionalMemory 0000bffe0000 0 0000001f WC WT WB BootServicesData 0000bffff000 0 00000001 WC WT WB ConventionalMemory 000100000000 0 00140000 WC WT WB Reserved 000004000000 0 00001400 MemoryMappedIO 0000f2284000 f2284000 00000001 UC RUNTIME MemoryMappedIO 0000f2700000 f2700000 00000001 UC RUNTIME MemoryMappedIO 0000f93c0000 f93c0000 00000030 UC RUNTIME Physical memory chunk(s): 0x00001000 - 0x03ffffff, 63 MB ( 16383 pages) 0x05400000 - 0xb675ffff, 2835 MB ( 725856 pages) 0xb6770000 - 0xbf80ffff, 144 MB ( 37024 pages) 0xbfbf0000 - 0xbfffffff, 4 MB ( 1040 pages) 0x100000000 - 0x23fffffff, 5120 MB (1310720 pages) Excluded memory regions: 0x04000000 - 0x041fffff, 2 MB ( 512 pages) NoAlloc NoDump 0x04000000 - 0x053fffff, 20 MB ( 5120 pages) NoAlloc 0xae800000 - 0xb018bfff, 25 MB ( 6540 pages) NoAlloc 0xb6760000 - 0xb676ffff, 0 MB ( 16 pages) NoAlloc 0xbf810000 - 0xbfbeffff, 3 MB ( 992 pages) NoAlloc 0xbfdb0000 - 0xbffdffff, 2 MB ( 560 pages) NoAlloc 0xf2284000 - 0xf2284fff, 0 MB ( 1 pages) NoAlloc 0xf2700000 - 0xf2700fff, 0 MB ( 1 pages) NoAlloc 0xf93c0000 - 0xf93effff, 0 MB ( 48 pages) NoAlloc Found 4 CPUs in the device tree Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE #2: Wed May 25 20:04:10 MSK 2022 root@honeycomb.local:/usr/crochet/work/obj/usr/crochet/src-release-13.1/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT: init without driver. Preloaded elf kernel "/boot/kernel/kernel" at 0xffff00000175c000. Preloaded elf module "/boot/kernel/if_ure.ko" at 0xffff0000017653a0. Preloaded elf module "/boot/kernel/cryptodev.ko" at 0xffff000001765b38. Preloaded hostuuid "/etc/hostid" at 0xffff0000017662d8. Preloaded elf module "/boot/kernel/zfs.ko" at 0xffff000001766328. Preloaded boot_entropy_cache "/boot/entropy" at 0xffff000001766b40. Preloaded elf module "/boot/kernel/if_axge.ko" at 0xffff000001766b98. Preloaded boot_entropy_platform "efi_rng_seed" at 0xffff000001767330. Preloaded TSLOG data "TSLOG" at 0xffff000001767388. module firmware already present! module ure already present! real memory = 8564830208 (8168 MB) Physical memory chunk(s): 0x00000000001000 - 0x00000003ffffff, 67104768 bytes (16383 pages) 0x00000005400000 - 0x000000ae7fffff, 2839543808 bytes (693248 pages) 0x000000b018c000 - 0x000000b675ffff, 106774528 bytes (26068 pages) 0x000000b6770000 - 0x000000bf80ffff, 151650304 bytes (37024 pages) 0x000000bfbf0000 - 0x000000bfdaffff, 1835008 bytes (448 pages) 0x000000bffe0000 - 0x000000bfffffff, 131072 bytes (32 pages) 0x00000100000000 - 0x0000023358efff, 5156433920 bytes (1258895 pages) avail memory = 8322289664 (7936 MB) Starting CPU 1 (1) Starting CPU 2 (100) Starting CPU 3 (101) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: read 4096 bytes from preloaded cache random: read 2048 bytes from platform bootloader random: unblocking device. VIMAGE (virtualized network stack) enabled hostuuid: using bb82594d-a5fc-11ec-8435-f8e43b81afdd ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 random: entropy device external interface snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 firmware: 'tegra210_xusb_fw' version 0: 132608 bytes loaded at 0xffff0000009c5a28 MAP bf810000 mode 2 pages 992 MAP bfdb0000 mode 2 pages 560 MAP f2284000 mode 0 pages 1 MAP f2700000 mode 0 pages 1 MAP f93c0000 mode 0 pages 48 null: crypto: openfirm: kbd0 at kbdmux0 mem: ofwbus0: simplebus0: on ofwbus0 simplebus1: on simplebus0 simplebus2: on ofwbus0 simplebus3: on simplebus2 clk_fixed0: on simplebus2 clk_fixed1: on simplebus2 clk_fixed2: on simplebus2 clk_fixed3: on simplebus2 clk_fixed4: on simplebus2 clk_fixed5: on simplebus2 clk_fixed6: on simplebus2 regfix0: on ofwbus0 regfix1: on ofwbus0 simple_mfd0: mem 0x6f4000-0x6f5fff on simplebus1 simple_mfd1: mem 0x6f8000-0x6f8fff on simplebus1 simple_mfd2: mem 0x440000-0x441fff on simplebus3 simple_mfd3: mem 0x400000-0x400fff on simplebus3 psci0: on ofwbus0 psci0: PSCI version 0.2 compatible mv_ap806_clock0: mem 0x6f4000-0x6f5fff on simple_mfd0 Clock: ap806-cpu-cluster-0, parent: (NULL)(-1), freq: 1400000000 Clock: ap806-cpu-cluster-1, parent: (NULL)(-1), freq: 1400000000 Clock: ap806-fixed, parent: (NULL)(-1), freq: 1200000000 Clock: ap806-mss, parent: ap806-fixed(0), freq: 200000000 Clock: ap806-sdio, parent: ap806-fixed(0), freq: 400000000 mv_cp110_icu_bus0: mem 0x1e0000-0x1e043f on simplebus3 gic0: mem 0x210000-0x21ffff,0x220000-0x23ffff,0x240000-0x25ffff,0x260000-0x27ffff irq 9 on simplebus1 gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 352 gicv2m0: mem 0x280000-0x280fff on gic0 gicv2m0: using spi 160 to 191 gicv2m1: mem 0x290000-0x290fff on gic0 gicv2m1: using spi 192 to 223 gicv2m2: mem 0x2a0000-0x2a0fff on gic0 gicv2m2: using spi 224 to 255 gicv2m3: mem 0x2b0000-0x2b0fff on gic0 gicv2m3: using spi 256 to 287 mv_ap806_gicp0: mem 0x3f0040-0x3f004f on simplebus1 mv_ap806_sei0: mem 0x3f0200-0x3f023f irq 16 on simplebus1 mv_pinctrl0: mem 0x6f4000-0x6f5fff on simple_mfd0 Processing 1 pin-config node(s) in pinctrl-0 for serial@512000 mv_cp110_icu0: mem 0x1e0000-0x1e043f on mv_cp110_icu_bus0 mv_cp110_icu1: mem 0x1e0000-0x1e043f on mv_cp110_icu_bus0 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 generic_timer0: irq 10,11,12,13 on simplebus1 Timecounter "ARM MPCore Timecounter" frequency 25000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 25000000 Hz quality 1000 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpio0: mem 0x6f4000-0x6f5fff on simple_mfd0 gpio0: 20 pins available simple_mfd0: no default resources for rid = 0, type = 1 gpiobus0: on gpio0 gpio1: mem 0x440000-0x441fff irq 46,47,48,49 on simple_mfd2 gpio1: 32 pins available gpiobus1: on gpio1 gpio2: mem 0x440000-0x441fff irq 50,51,52,53 on simple_mfd2 gpio2: 31 pins available gpiobus2: on gpio2 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 efirtc0: efirtc0: registered as a time-of-day clock, resolution 1.000000s simplebus1: mem 0x100000-0x1fffff irq 0,1,2,3,4,5,6,7,8 disabled compat marvell,ap806-smmu-500 (no driver attached) pmu0: irq 14 on simplebus1 pmu0: Cannot get interrupt device_attach: pmu0 attach returned 6 simplebus1: mem 0x300000-0x303fff,0x304000-0x307fff,0x308000-0x30bfff,0x30c000-0x30ffff compat marvell,odmi-controller (no driver attached) simplebus1: mem 0x3f0100-0x3f010f irq 15 compat marvell,armada-8k-pic (no driver attached) simplebus1: mem 0x400000-0x400fff,0x410000-0x410fff compat marvell,armada-7k-xor (no driver attached) simplebus1: mem 0x420000-0x420fff,0x430000-0x430fff compat marvell,armada-7k-xor (no driver attached) simplebus1: mem 0x440000-0x440fff,0x450000-0x450fff compat marvell,armada-7k-xor (no driver attached) simplebus1: mem 0x460000-0x460fff,0x470000-0x470fff compat marvell,armada-7k-xor (no driver attached) simplebus1: mem 0x510600-0x51064f irq 17 compat marvell,armada-380-spi (no driver attached) twsi0: mem 0x511000-0x51101f irq 18 on simplebus1 twsi0: calculated baud rates are: 48 kHz (M=12, N=4) for slow, 96 kHz (M=12, N=3) for fast. iicbus0: on twsi0 iic0: on iicbus0 uart0: <16550 or compatible> mem 0x512000-0x5120ff irq 19 on simplebus1 uart0: console (114678,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD simplebus1: mem 0x512100-0x5121ff irq 20 disabled compat snps,dw-apb-uart (no driver attached) simplebus1: mem 0x610000-0x610fff,0x600000-0x600fff irq 21 compat arm,sbsa-gwdt (no driver attached) sdhci_xenon0: mem 0x6e0000-0x6e02ff irq 22 on simplebus1 sdhci_xenon0: Non-removable media sdhci_xenon0: Non-removable media sdhci_xenon0-slot0: 400MHz HS 8bits VDD: 3.3V VCCQ: 3.3V 1.8V 1.2V DRV: BACD DMA non-removable sdhci_xenon0-slot0: eMMC: HS200 sdhci_xenon0-slot0: UHS-I: SDR12 SDR25 SDR50 SDR104 DDR50 sdhci_xenon0-slot0: Re-tuning count 0 secs, mode 3 sdhci_xenon0-slot0: ============== REGISTER DUMP ============== sdhci_xenon0-slot0: Sys addr: 0x00000000 | Version: 0x00000002 sdhci_xenon0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000000 sdhci_xenon0-slot0: Argument: 0x00000000 | Trn mode: 0x00000011 sdhci_xenon0-slot0: Present: 0x01ff0000 | Host ctl: 0x0000001e sdhci_xenon0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_xenon0-slot0: Wake-up: 0x00000000 | Clock: 0x00000407 sdhci_xenon0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_xenon0-slot0: Int enab: 0x17ff50bf | Sig enab: 0x17ff40ff sdhci_xenon0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000001 sdhci_xenon0-slot0: Caps: 0x35ee0099 | Caps2: 0x0000af77 sdhci_xenon0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 sdhci_xenon0-slot0: ADMA addr:0xbd42900c | Slot int: 0x00000000 sdhci_xenon0-slot0: =========================================== sdhci_xenon0-slot0: Card inserted mmc0: on sdhci_xenon0 gpioc0: on gpio0 mv_thermal0: mem 0x6f8000-0x6f8fff irq 45 on simple_mfd1 simple_mfd1: mem 0x6f8000-0x6f8fff compat marvell,ap806-cpu-clock (no driver attached) cpulist0: on ofwbus0 cpu0: on cpulist0 cpu0: missing 'clock-frequency' property cpu1: on cpulist0 cpu1: missing 'clock-frequency' property cpu2: on cpulist0 cpu2: missing 'clock-frequency' property cpu3: on cpulist0 cpu3: missing 'clock-frequency' property simplebus3: mem 0-0xfffff,0x129000-0x133fff,0x220000-0x2207ff compat marvell,armada-7k-pp22 (no driver attached) simplebus3: mem 0x120000-0x125fff compat marvell,comphy-cp110 (no driver attached) simplebus3: mem 0x12a200-0x12a20f compat marvell,orion-mdio (no driver attached) simplebus3: mem 0x12a600-0x12a60f disabled compat marvell,xmdio (no driver attached) simplebus3: mem 0x284000-0x28401f,0x284080-0x2840a3 irq 26 disabled compat marvell,armada-8k-rtc (no driver attached) simple_mfd2: mem 0x440000-0x441fff disabled compat marvell,cp110-clock (no driver attached) gpioc1: on gpio1 gpioc2: on gpio2 simple_mfd2: mem 0x440000-0x441fff compat marvell,armada-7k-pinctrl (no driver attached) mv_thermal1: mem 0x400000-0x400fff irq 54 on simple_mfd3 xhci0: mem 0x500000-0x503fff irq 27 on simplebus3 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 xhci0: usbpf: Attached xhci1: mem 0x510000-0x513fff irq 28 on simplebus3 xhci1: 32 bytes context size, 32-bit DMA usbus1 on xhci1 xhci1: usbpf: Attached ahci0: mem 0x540000-0x56ffff irq 29 on simplebus3 ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS ahci0: Caps: 64bit NCQ SNTF AL 6Gbps PM FBS PMD SSC PSC 32cmd eSATA 2ports ahcich0: at channel 0 on ahci0 ahcich0: Caps: CPD ESP FBSCP ahcich1: at channel 1 on ahci0 ahcich1: Caps: CPD ESP FBSCP simplebus3: mem 0x6a0000-0x6a0fff,0x6b0000-0x6b0fff compat marvell,armada-7k-xor (no driver attached) simplebus3: mem 0x6c0000-0x6c0fff,0x6d0000-0x6d0fff compat marvell,armada-7k-xor (no driver attached) simplebus3: mem 0x700600-0x70064f disabled compat marvell,armada-380-spi (no driver attached) simplebus3: mem 0x700680-0x7006cf disabled compat marvell,armada-380-spi (no driver attached) twsi1: mem 0x701000-0x70101f irq 30 on simplebus3 twsi1: calculated baud rates are: 48 kHz (M=15, N=4) for slow, 97 kHz (M=15, N=3) for fast. iicbus1: on twsi1 iic1: on iicbus1 iicbus1: at addr 0x42 simplebus3: mem 0x701100-0x70111f irq 31 disabled compat marvell,mv78230-i2c (no driver attached) simplebus3: mem 0x702000-0x7020ff irq 32 disabled compat snps,dw-apb-uart (no driver attached) simplebus3: mem 0x702100-0x7021ff irq 33 disabled compat snps,dw-apb-uart (no driver attached) simplebus3: mem 0x702200-0x7022ff irq 34 disabled compat snps,dw-apb-uart (no driver attached) simplebus3: mem 0x702300-0x7023ff irq 35 disabled compat snps,dw-apb-uart (no driver attached) simplebus3: mem 0x720000-0x720053 irq 36 disabled compat marvell,armada-8k-nand-controller (no driver attached) simplebus3: mem 0x760000-0x76007c irq 37 compat marvell,armada-8k-rng (no driver attached) sdhci_xenon1: mem 0x780000-0x7802ff irq 38 on simplebus3 sdhci_xenon1-slot0: 400MHz HS 8bits VDD: 3.3V VCCQ: 3.3V 1.8V 1.2V DRV: BACD DMA removable sdhci_xenon1-slot0: eMMC: HS200 sdhci_xenon1-slot0: UHS-I: SDR12 SDR25 SDR50 SDR104 DDR50 sdhci_xenon1-slot0: Re-tuning count 0 secs, mode 3 sdhci_xenon1-slot0: ============== REGISTER DUMP ============== sdhci_xenon1-slot0: Sys addr: 0x00000000 | Version: 0x00000002 sdhci_xenon1-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000000 sdhci_xenon1-slot0: Argument: 0x000001ff | Trn mode: 0x00000000 sdhci_xenon1-slot0: Present: 0x01ff0000 | Host ctl: 0x00000000 sdhci_xenon1-slot0: Power: 0x0000000b | Blk gap: 0x00000000 sdhci_xenon1-slot0: Wake-up: 0x00000000 | Clock: 0x0000f447 sdhci_xenon1-slot0: Timeout: 0x0000000e | Int stat: 0x00018000 sdhci_xenon1-slot0: Int enab: 0x17ff50bf | Sig enab: 0x17ff40ff sdhci_xenon1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000008 sdhci_xenon1-slot0: Caps: 0x35ee0099 | Caps2: 0x0000af77 sdhci_xenon1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 sdhci_xenon1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_xenon1-slot0: =========================================== sdhci_xenon1-slot0: Card inserted mmc1: on sdhci_xenon1 simplebus3: mem 0x800000-0x9fffff irq 39,40,41,42,43,44 compat inside-secure,safexcel-eip197b (no driver attached) simplebus2: mem 0xf2600000-0xf260ffff,0xf6f00000-0xf6f7ffff irq 23 disabled type pci compat marvell,armada8k-pcie (no driver attached) simplebus2: mem 0xf2620000-0xf262ffff,0xf7f00000-0xf7f7ffff irq 24 disabled type pci compat marvell,armada8k-pcie (no driver attached) pcib0: mem 0xf2640000-0xf264ffff,0xf8f00000-0xf8f7ffff irq 25 on simplebus2 pcib0: Cannot get phy[0] pcib0: Bus is cache-coherent pcib0: Using iATU legacy mode pcib0: Detected outbound iATU regions: 8 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x11ab, dev=0x0110, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 32 messages, 64 bit, vector masks MSI-X supports 1 message in maps 0x10 and 0x18 map[10]: type Memory, range 64, base 0, size 20, enabled secbus=1, subbus=255 pcib1: at device 0.0 on pci0 pcib0: failed to reserve resource for pcib1 pcib1: failed to allocate initial I/O port window: 0-0xfff pcib0: failed to reserve resource for pcib1 pcib1: failed to allocate initial memory window: 0-0xfffff pcib0: failed to reserve resource for pcib1 pcib1: failed to allocate initial prefetch window: 0-0xfffff pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 255 pci1: on pcib1 pcib1: allocated bus range (1-1) for rid 0 of pci1 pci1: domain=0, physical bus=1 gpioregulator0: on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 crypto: assign cryptosoft0 driver id 0, flags 0x6000000 armv8crypto0: crypto: assign armv8crypto0 driver id 1, flags 0xe000000 Found SMCCC version 1.1 Device configuration finished. procfs registered Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) vlan: initialized, using hash tables with chaining crypto: lo0: bpf attached tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536 IPsec: Initialized Security Association Processing. sdhci_xenon0: Powering up sd/mmc usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 5.0Gbps Super Speed USB v3.0 ahcich0: AHCI reset... sdhci_xenon0-slot0: Divider 500 for freq 400000 (base 400000000) mmc0: Probing bus ugen1.1: at usbus1 uhub0 on usbus1 uhub0: on usbus1 ugen0.1: at usbus0 uhub1 on usbus0 uhub1: on usbus0 ahcich0: SATA connect timeout time=10000us status=00000000 ahcich0: AHCI reset: device not found ahcich1: AHCI reset... ahcich1: SATA connect time=100us status=00000133 ahcich1: AHCI reset: device found mmc0: SD probe: failed mmc0: MMC probe: OK (OCR: 0x40ff8080) mmc0: Current OCR: 0x00ff8080 mmc0: Probing cards mmc0: New card detected (CID 45010044463430313601f174770c3600) mmc0: New card detected (CSD d00f00328f5903ffffffffef8a404000) ahcich1: AHCI reset: device ready after 100ms uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: at usbus0 uhub2 on uhub1 uhub2: on usbus0 uhub2: 4 ports with 4 removable, self powered mmc0: Card at relative address 0x0002 added: mmc0: card: MMCHC DF4016 0.1 SN F174770C MFG 03/2019 by 69 0x0000 mmc0: quirks: 0 mmc0: bus: 4bit, 52MHz (high speed timing) mmc0: memory: 30777344 blocks, erase sector 1024 blocks mmc0: setting transfer rate to 52.000MHz (high speed timing) sdhci_xenon0-slot0: Divider 4 for freq 50000000 (base 400000000) mmc0: setting bus width to 4 bits high speed timing mmc0: Failed to set VCCQ for card at relative address 2 mmcsd0: taking advantage of TRIM mmcsd0: cache size 4096KB mmcsd0: 16GB at mmc0 50.0MHz/4bit/65535-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 4MB partition 3 at mmcsd0 sdhci_xenon1: Powering up sd/mmc sdhci_xenon1-slot0: Divider 500 for freq 400000 (base 400000000) mmc1: Probing bus GEOM: new disk mmcsd0 GEOM: new disk mmcsd0boot0 GEOM: new disk mmcsd0boot1 mmc1: SD probe: failed mmc1: MMC probe: failed mmc1: Current OCR: 0x00000000 mmc1: No compatible cards found on bus sdhci_xenon1: Powering down sd/mmc CPU 0: ARM Cortex-A72 r0p1 affinity: 0 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = Trying to mount root from ufs:/dev/gpt/install [rw,noatime]... Instruction Set Attributes 1 = <> Processor Features 0 = Processor Features 1 = <> Memory Model Features 0 = Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> AArch32 Instruction Set Attributes 5 = AArch32 Media and VFP Features 0 = AArch32 Media and VFP Features 1 = CPU 1: ARM Cortex-A72 r0p1 affinity: 0 1 CPU 2: ARM Cortex-A72 r0p1 affinity: 1 0 CPU 3: ARM Cortex-A72 r0p1 affinity: 1 1 Release APs...ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 ada0: ACS-4 ATA SATA 3.x device ada0: Serial Number 9120315D01789 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 244198MB (500118192 512 byte sectors) done pass0 at ahcich1 bus 0 scbus1 target 0 lun 0 pass0: ACS-4 ATA SATA 3.x device pass0: Serial Number 9120315D01789 pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) pass0: Command Queueing enabled GEOM: new disk ada0 Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583) usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583) ugen0.3: at usbus0 umass0 on uhub2 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:2:0: Attached to scbus2 pass1 at umass-sim0 bus 0 scbus2 target 0 lun 0 pass1: Removable Direct Access SPC-4 SCSI device pass1: Serial Number 0501bd17db22225f142b36d18124639f7f80b71832b0be648708eaf1450a pass1: 400.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: Removable Direct Access SPC-4 SCSI device da0: Serial Number 0501bd17db22225f142b36d18124639f7f80b71832b0be648708eaf1450a da0: 400.000MB/s transfers da0: 29340MB (60088320 512 byte sectors) da0: quirks=0x2 da0: Delete methods: ugen0.4: at usbus0 uhub3 on uhub1 uhub3: on usbus0 uhub3: MTT enabled uhub3: 4 ports with 4 removable, self powered WARNING: / was not properly dismounted efirtc0: providing initial system time Dual Console: Serial Primary, Video Secondary start_init: trying /sbin/init lo0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd)