---<<BOOT>>---
                   Type     Physical      Virtual   #Pages Attr
     ConventionalMemory 000080000000            0 00001000 WB 
    RuntimeServicesData 000081000000     81000000 000000c0 WB RUNTIME
     ConventionalMemory 0000810c0000            0 0000ef40 WB 
               Reserved 000090000000            0 00010000 WC WT WB 
     ConventionalMemory 0000a0000000            0 00054bf0 WB 
       BootServicesData 0000f4bf0000            0 00000001 WB 
             LoaderData 0000f4bf1000            0 00000001 WB 
       BootServicesData 0000f4bf2000            0 0000028e WB 
             LoaderData 0000f4e80000            0 00008000 WB 
       BootServicesData 0000fce80000            0 00000001 WB 
             LoaderCode 0000fce81000            0 00000134 WB 
       BootServicesData 0000fcfb5000            0 00001902 WB 
       BootServicesCode 0000fe8b7000            0 00000049 WB 
    RuntimeServicesCode 0000fe900000     fe900000 00000080 WB RUNTIME
    RuntimeServicesData 0000fe980000     fe980000 00000050 WB RUNTIME
    RuntimeServicesCode 0000fe9d0000     fe9d0000 00000090 WB RUNTIME
    RuntimeServicesData 0000fea60000     fea60000 000000a0 WB RUNTIME
    RuntimeServicesCode 0000feb00000     feb00000 000000f0 WB RUNTIME
     ConventionalMemory 0000febf0000            0 00000014 WB 
       BootServicesData 0000fec04000            0 000007d0 WB 
       BootServicesCode 0000ff3d4000            0 0000012c WB 
    RuntimeServicesCode 0000ff500000     ff500000 00000090 WB RUNTIME
     ConventionalMemory 0000ff590000            0 00000010 WB 
    RuntimeServicesData 0000ff5a0000     ff5a0000 00000120 WB RUNTIME
     ConventionalMemory 0000ff6c0000            0 00000017 WB 
       BootServicesData 0000ff6d7000            0 00000001 WB 
       BootServicesCode 0000ff6d8000            0 00000016 WB 
       BootServicesData 0000ff6ee000            0 00000912 WB 
     ConventionalMemory 000880000000            0 00080000 WB 
         MemoryMappedIO 000000000000            0 00000001 UC RUNTIME
Physical memory chunk(s):
  0x80000000 - 0x8fffffff,   256 MB (  65536 pages)
  0xa0000000 - 0xfe8fffff,  1513 MB ( 387328 pages)
  0xfe980000 - 0xfe9cffff,     0 MB (     80 pages)
  0xfea60000 - 0xfeafffff,     0 MB (    160 pages)
  0xfebf0000 - 0xff4fffff,     9 MB (   2320 pages)
  0xff590000 - 0xffffffff,    10 MB (   2672 pages)
  0x880000000 - 0x8ffffffff,  2048 MB ( 524288 pages)
Excluded memory regions:
  0x00000000 - 0x00000fff,     0 MB (      1 pages) NoAlloc 
  0x81000000 - 0x810bffff,     0 MB (    192 pages) NoAlloc 
  0x90000000 - 0x9fffffff,   256 MB (  65536 pages) NoAlloc 
  0xf5000000 - 0xf6790fff,    23 MB (   6033 pages) NoAlloc 
  0xfd8b7000 - 0xfe09ffff,     7 MB (   2025 pages) NoAlloc 
  0xfe900000 - 0xfebeffff,     2 MB (    752 pages) NoAlloc 
  0xff500000 - 0xff58ffff,     0 MB (    144 pages) NoAlloc 
  0xff5a0000 - 0xff6bffff,     1 MB (    288 pages) NoAlloc 
Found 8 CPUs in the device tree
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-STABLE #8 stable/13-n245708-b7ef4b7eb23d-dirty: Sat Jun 12 14:13:54 MSK 2021
    root@honeycomb.local:/usr/crochet/work/obj/usr/crochet/src-stable-13.0/arm64.aarch64/sys/BAIKAL arm64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1920x1080
Preloaded elf kernel "/boot/kernel/kernel" at 0xffff000001562000.
Preloaded hostuuid "/etc/hostid" at 0xffff00000156b378.
Preloaded boot_entropy_cache "/boot/entropy" at 0xffff00000156b3c8.
Preloaded elf module "/boot/kernel/cryptodev.ko" at 0xffff00000156b420.
Preloaded elf module "/boot/kernel/zfs.ko" at 0xffff00000156bbc0.
Preloaded dtb "/boot/dtb/bm-lgp-05-pico.dtb" at 0xffff00000156c3d8.
real memory  = 4023844864 (3837 MB)
Physical memory chunk(s):
0x00000080000000 - 0x00000080ffffff, 16777216 bytes (4096 pages)
0x000000810c0000 - 0x0000008fffffff, 250871808 bytes (61248 pages)
0x000000a0000000 - 0x000000f4ffffff, 1426063360 bytes (348160 pages)
0x000000f6791000 - 0x000000fd8b6fff, 118644736 bytes (28966 pages)
0x000000fe0a0000 - 0x000000fe8fffff, 8781824 bytes (2144 pages)
0x000000febf0000 - 0x000000ff4fffff, 9502720 bytes (2320 pages)
0x000000ff590000 - 0x000000ff59ffff, 65536 bytes (16 pages)
0x000000ff6c0000 - 0x000000ffffffff, 9699328 bytes (2368 pages)
0x00000880000000 - 0x000008fa16afff, 2048307200 bytes (500075 pages)
avail memory = 3887951872 (3707 MB)
Starting CPU 1 (1)
Starting CPU 1 (100)
Starting CPU 1 (101)
Starting CPU 1 (200)
Starting CPU 1 (201)
Starting CPU 1 (300)
Starting CPU 1 (301)
FreeBSD/SMP: Multiprocessor System Detected: 1 CPUs
random: read 4096 bytes from preloaded cache
random: unblocking device.
VIMAGE (virtualized network stack) enabled
hostuuid: using 1766cbd6-1dd2-11b2-9a6c-0f58eb30c1c1
ULE: setup cpu 0
random: entropy device external interface
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
MAP 81000000 mode 2 pages 192
MAP fe900000 mode 2 pages 128
MAP fe980000 mode 2 pages 80
MAP fe9d0000 mode 2 pages 144
MAP fea60000 mode 2 pages 160
MAP feb00000 mode 2 pages 240
MAP ff500000 mode 2 pages 144
MAP ff5a0000 mode 2 pages 288
MAP 0 mode 0 pages 1
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
crypto: <crypto core>
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
mem: <memory>
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed2: <Fixed clock> on ofw_clkbus0
clk_fixed3: <Fixed clock> on ofw_clkbus0
clk_fixed4: <Fixed clock> on ofw_clkbus0
clk_fixed5: <Fixed clock> on ofw_clkbus0
clk_fixed6: <Fixed clock> on ofw_clkbus0
clk_fixed7: <Fixed clock> on ofw_clkbus0
clk_fixed8: <Fixed clock> on ofw_clkbus0
clk_fixed9: <Fixed clock> on ofw_clkbus0
clk_fixed10: <Fixed clock> on ofw_clkbus0
clk_fixed11: <Fixed clock> on ofw_clkbus0
clk_fixed12: <Fixed clock> on ofw_clkbus0
clk_fixed13: <Fixed clock> on ofw_clkbus0
clk_fixed14: <Fixed clock> on ofw_clkbus0
clk_fixed15: <Fixed clock> on ofw_clkbus0
clk_fixed16: <Fixed clock> on ofw_clkbus0
clk_fixed17: <Fixed clock> on ofw_clkbus0
clk_fixed18: <Fixed clock> on ofw_clkbus0
clk_fixed19: <Fixed clock> on ofw_clkbus0
clk_fixed20: <Fixed clock> on ofw_clkbus0
clk_fixed21: <Fixed clock> on ofw_clkbus0
clk_fixed22: <Fixed clock> on ofw_clkbus0
clk_fixed23: <Fixed clock> on ofw_clkbus0
clk_fixed23: Malformed 'clock-output-names' property csr50_clk
clk_fixed23: Cannot parse clock name.
device_attach: clk_fixed23 attach returned 6
clk_fixed23: <Fixed clock> on ofw_clkbus0
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
simplebus0: <Flattened device tree simple bus> on ofwbus0
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version 0.2 compatible
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
dwgpiobus0: <Synopsys® DesignWare® APB GPIO BUS> mem 0x20200000-0x2020ffff irq 27 on simplebus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0x2d000000-0x2d00ffff,0x2d100000-0x2d2fffff irq 64 on simplebus0
gic0: SPIs: 800, IDs: 65535
gic0: Start searching for Re-Distributor
gic0: CPU0 Re-Distributor has been found
gic0: CPU0 Re-Distributor woke up
gic0: CPU0 enabled CPU interface via system registers
its0: <ARM GIC Interrupt Translation Service> mem 0x2d020000-0x2d03ffff on gic0
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 50000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 50000000 Hz quality 1000
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
be_pvt0: <Baikal PVT Sensors> mem 0x28200000-0x2820ffff irq 22 on simplebus0
be_pvt1: <Baikal PVT Sensors> mem 0xc200000-0xc20ffff irq 23 on simplebus0
sysctl_warn_reuse: can't re-use a leaf (hw.temperature.GPU)!
be_pvt1: Cannot initialize sysctls
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0xa200000-0xa20ffff irq 24 on simplebus0
sysctl_warn_reuse: can't re-use a leaf (hw.temperature.GPU)!
be_pvt1: Cannot initialize sysctls
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0x26200000-0x2620ffff irq 25 on simplebus0
sysctl_warn_reuse: can't re-use a leaf (hw.temperature.GPU)!
be_pvt1: Cannot initialize sysctls
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0x2a060000-0x2a06ffff irq 26 on simplebus0
sysctl_warn_reuse: can't re-use a leaf (hw.temperature.GPU)!
be_pvt1: Cannot initialize sysctls
device_attach: be_pvt1 attach returned 6
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0xc200000-0xc20ffff irq 23 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0xa200000-0xa20ffff irq 24 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0x26200000-0x2620ffff irq 25 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0x2a060000-0x2a06ffff irq 26 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
efirtc0: cannot read EFI realtime clock, error 78
ofwbus0: <cmu_cluster0> compat baikal,cmu (no driver attached)
ofwbus0: <cmu_cluster1> compat baikal,cmu (no driver attached)
ofwbus0: <cmu_cluster2> compat baikal,cmu (no driver attached)
ofwbus0: <cmu_cluster3> compat baikal,cmu (no driver attached)
ofwbus0: <cmu0_avlsp> compat baikal,cmu (no driver attached)
ofwbus0: <cmu1_avlsp> compat baikal,cmu (no driver attached)
ofwbus0: <cmu_mali> compat baikal,cmu (no driver attached)
ofwbus0: <cmu0_xgbe> compat baikal,cmu (no driver attached)
ofwbus0: <cmu1_xgbe> compat baikal,cmu (no driver attached)
ofw_clkbus0: <opp_table_gpu> compat operating-points-v2 (no driver attached)
ofw_clkbus0: <cmu@cortex> compat baikal,cmu-device-clock (no driver attached)
ofw_clkbus0: <cmu1@avlsp> compat baikal,cmu-device-clock (no driver attached)
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed24: Malformed 'clock-output-names' property csr50_clk
clk_fixed24: Cannot parse clock name.
device_attach: clk_fixed24 attach returned 6
clk_fixed24: <Fixed factor clock> on ofw_clkbus0
clk_fixed24: Cannot FDT parameters.
device_attach: clk_fixed24 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: missing 'clock-frequency' property
cpu1: <Open Firmware CPU> on cpulist0
cpu1: missing 'clock-frequency' property
cpu2: <Open Firmware CPU> on cpulist0
cpu2: missing 'clock-frequency' property
cpu3: <Open Firmware CPU> on cpulist0
cpu3: missing 'clock-frequency' property
cpu4: <Open Firmware CPU> on cpulist0
cpu4: missing 'clock-frequency' property
cpu5: <Open Firmware CPU> on cpulist0
cpu5: missing 'clock-frequency' property
cpu6: <Open Firmware CPU> on cpulist0
cpu6: missing 'clock-frequency' property
cpu7: <Open Firmware CPU> on cpulist0
cpu7: missing 'clock-frequency' property
simplebus0: <memory-controller1@e200000> mem 0xe200000-0xe20ffff irq 4,5,6,7,8,9 disabled compat be,emc (no driver attached)
simplebus0: <memory-controller2@22200000> mem 0x22200000-0x2220ffff irq 10,11,12,13,14,15 compat be,emc (no driver attached)
syscon_generic_dev0: <syscon> mem 0x2000000-0x207ffff on simplebus0
pcib0: <Baikal PCI-E Controller> mem 0x2200000-0x2200fff,0x40100000-0x401fffff irq 16,17 on simplebus0
pcib0: Bus is not cache-coherent
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1d39, dev=0x8060, revid=0x01
	domain=0, bus=0, slot=0, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 3  supports D0 D1 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x10
	secbus=1, subbus=255
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   255
pcib1:   I/O decode        0x0-0xfff
pcib1:   memory decode     0x40100000-0x401fffff
pcib1:   special decode    subtractive
pci1: <PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0x40180000, size 17, memory disabled
pcib1: allocated memory range (0x40180000-0x4019ffff) for rid 10 of pci0:1:0:0
	map[14]: type Memory, range 32, base 0x40100000, size 19, enabled
pcib1: allocated memory range (0x40100000-0x4017ffff) for rid 14 of pci0:1:0:0
	map[18]: type I/O Port, range 32, base 0, size  5, port disabled
	map[1c]: type Memory, range 32, base 0x401a0000, size 14, enabled
pcib1: allocated memory range (0x401a0000-0x401a3fff) for rid 1c of pci0:1:0:0
pci1: <network, ethernet> at device 0.0 (no driver attached)
pcib2: <Baikal PCI-E Controller> mem 0x2210000-0x2210fff,0x50100000-0x501fffff irq 18,19 on simplebus0
pcib2: Bus is not cache-coherent
pci2: <PCI bus> on pcib2
pci2: domain=2, physical bus=0
found->	vendor=0x1d39, dev=0x8060, revid=0x01
	domain=2, bus=0, slot=0, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 3  supports D0 D1 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x10
	secbus=1, subbus=255
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pcib3:   domain            2
pcib3:   secondary bus     1
pcib3:   subordinate bus   255
pcib3:   special decode    subtractive
pci3: <PCI bus> on pcib3
pcib3: allocated bus range (1-1) for rid 0 of pci3
pci3: domain=2, physical bus=1
pcib4: <Baikal PCI-E Controller> mem 0x2220000-0x2220fff,0x60000000-0x600fffff irq 20,21 on simplebus0
pcib4: Bus is not cache-coherent
pci4: <PCI bus> on pcib4
pci4: domain=4, physical bus=0
found->	vendor=0x1d39, dev=0x8060, revid=0x01
	domain=4, bus=0, slot=0, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 3  supports D0 D1 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 1 message in map 0x10
	secbus=1, subbus=255
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pcib5:   domain            4
pcib5:   secondary bus     1
pcib5:   subordinate bus   255
pcib5:   special decode    subtractive
pci5: <PCI bus> on pcib5
pcib5: allocated bus range (1-1) for rid 0 of pci5
pci5: domain=4, physical bus=1
be_pvt1: <Baikal PVT Sensors> mem 0xc200000-0xc20ffff irq 23 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0xa200000-0xa20ffff irq 24 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0x26200000-0x2620ffff irq 25 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
be_pvt1: <Baikal PVT Sensors> mem 0x2a060000-0x2a06ffff irq 26 on simplebus0
be_pvt1: Cannot allocate memory resources
device_attach: be_pvt1 attach returned 6
gpio0: <DesignWare General-Purpose I/O Interface> irq 104 on dwgpiobus0
port 0
gpio0: Version = 0x3230392a
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
spi0: <Baikal SPI> mem 0x20210000-0x2021ffff irq 28 on simplebus0
spi0: cannot get apb_pclk clock
device_attach: spi0 attach returned 2
simplebus0: <i2s@20220000> mem 0x20220000-0x2022ffff irq 29,30,31,32 compat snps,designware-i2s (no driver attached)
uart0: could not determine frequency
uart0: could not determine frequency
uart0: <16550 or compatible> mem 0x20230000-0x2023ffff irq 33 on simplebus0
uart0: fast interrupt
uart0: PPS capture mode: DCD
uart1: could not determine frequency
uart1: could not determine frequency
uart1: <16550 or compatible> mem 0x20240000-0x2024ffff irq 34 on simplebus0
uart1: fast interrupt
uart1: PPS capture mode: DCD
simplebus0: <i2c0@20250000> mem 0x20250000-0x2025ffff irq 35 compat snps,designware-i2c (no driver attached)
simplebus0: <i2c1@20260000> mem 0x20260000-0x2026ffff irq 36 compat snps,designware-i2c (no driver attached)
simplebus0: <smbus0@20270000> mem 0x20270000-0x2027ffff irq 37 compat be,smbus (no driver attached)
simplebus0: <smbus1@20280000> mem 0x20280000-0x2028ffff irq 38 compat be,smbus (no driver attached)
simplebus0: <timer1@20290000> mem 0x20290000-0x20290013 irq 39 compat snps,dw-apb-timer-osc (no driver attached)
simplebus0: <timer2@20290014> mem 0x20290014-0x20290027 irq 40 compat snps,dw-apb-timer-sp (no driver attached)
simplebus0: <timer3@20290028> mem 0x20290028-0x2029003b irq 41 compat snps,dw-apb-timer-sp (no driver attached)
simplebus0: <timer4@2029003c> mem 0x2029003c-0x2029004f irq 42 compat snps,dw-apb-timer-sp (no driver attached)
simplebus0: <espi0@202a0000> mem 0x202a0000-0x202affff irq 43 disabled compat be,espi (no driver attached)
simplebus0: <dma@202b0000> mem 0x202b0000-0x202bffff irq 44 disabled compat snps,dma-spear1340 (no driver attached)
simplebus0: <vdu_lvds@202d0000> mem 0x202d0000-0x202d0fff irq 45,46 disabled compat baikal,vdu (no driver attached)
simplebus0: <mmc@202e0000> mem 0x202e0000-0x202effff irq 47,48 compat snps,dwcmshc-sdhci (no driver attached)
simplebus0: <vdec@24200000> mem 0x24200000-0x2420ffff irq 49 compat baikal,d5500-vxd (no driver attached)
simplebus0: <gpu@2a200000> mem 0x2a200000-0x2a203fff irq 50,51,52 compat arm,mali-midgard (no driver attached)
be_dwc30: <Baikal DWC3> on simplebus0
xhci0: <Synopsys Designware DWC3> mem 0x2c400000-0x2c4fffff irq 105,106,107 on be_dwc30
xhci0: snps id: 5533290a
xhci0: 64 bytes context size, 32-bit DMA
usbus0: trying to attach
usbus0 on xhci0
xhci0: usbpf: Attached
be_dwc31: <Baikal DWC3> on simplebus0
xhci1: <Synopsys Designware DWC3> mem 0x2c500000-0x2c5fffff irq 108,109,110,111,112,113,114,115,116 on be_dwc31
xhci1: snps id: 5533290a
xhci1: 64 bytes context size, 32-bit DMA
usbus1: trying to attach
usbus1 on xhci1
xhci1: usbpf: Attached
ahci0: <AHCI SATA controller> mem 0x2c600000-0x2c60ffff irq 53 on simplebus0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 6Gbps PM FBS PMD SSC PSC 32cmd CCC 1ports
ahci0: Caps2: APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahci1: <AHCI SATA controller> mem 0x2c610000-0x2c61ffff irq 54 on simplebus0
ahci1: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahci1: Caps: 64bit NCQ SNTF MPS ALP AL CLO 6Gbps PM FBS PMD SSC PSC 32cmd CCC 1ports
ahci1: Caps2: APST
ahcich1: <AHCI channel> at channel 0 on ahci1
ahcich1: Caps:
simplebus0: <dma@2c620000> mem 0x2c620000-0x2c620fff irq 55,56,57,58,59,60,61,62,63 disabled compat arm,pl330 (no driver attached)
dwc0: <Gigabit Ethernet Controller> mem 0x30240000-0x3024ffff irq 65 on simplebus0
dwc0: MAC clock(eth_clk) freq: 50000000
dwc0: PHY attach failed
device_attach: dwc0 attach returned 6
simplebus0: <eth1@30250000> mem 0x30250000-0x3025ffff irq 66 disabled compat be,dwmac (no driver attached)
simplebus0: <be-mdio> disabled compat be,mdio-gpio (no driver attached)
simplebus0: <eth2@30200000> mem 0x30200000-0x3020ffff,0x30210000-0x3021ffff irq 67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83 disabled compat amd,xgbe-seattle-v1a (no driver attached)
simplebus0: <eth3@30220000> mem 0x30220000-0x3022ffff,0x30230000-0x3023ffff irq 84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100 disabled compat amd,xgbe-seattle-v1a (no driver attached)
simplebus0: <vdu_hdmi@30260000> mem 0x30260000-0x30260fff irq 101,102 compat baikal,vdu (no driver attached)
hdmiaudio0: <Baikal HDMI Audio> mem 0x30280000-0x3029ffff irq 103 on simplebus0
ofwbus0: <hdmi-out> compat hdmi-connector (no driver attached)
pcm0: <simple-audio-card> on ofwbus0
pcm1: <simple-audio-card> on ofwbus0
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
armv8crypto0: CPU lacks AES instructions
Found SMCCC version 1.2
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
crypto: <crypto device>
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
IPsec: Initialized Security Association Processing.
pcm0: no driver attached to cpu node
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
ahcich0: AHCI reset...
pcm1: cpu node is missing
CPU  0: ARM Cortex-A57 r1p3 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <CRC32>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
ugen1.1: <Synopsys XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Synopsys XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ahcich0: SATA connect timeout time=10000us status=00000000
ahcich0: AHCI reset: device not found
ahcich1: AHCI reset...
ahcich1: SATA connect time=100us status=00000133
ahcich1: AHCI reset: device found
ahcich1: AHCI reset: device ready after 0ms
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 CAM
pass0 at ahcich1 bus 0 scbus1 target 0 lun 0
pass0: <INTEL SSDSC2KG019T8 XCV10120> ACS-3 ATA SATA 3.x device
pass0: Serial Number PHYG036104PK1P9DGN
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
pass0: Command Queueing enabled
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSC2KG019T8 XCV10120> ACS-3 ATA SATA 3.x device
ada0: Serial Number PHYG036104PK1P9DGN
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 1831420MB (3750748848 512 byte sectors)
GEOM: new disk ada0
uhub1: 2 ports with 2 removable, self powered
uhub0: 6 ports with 6 removable, self powered
ugen0.2: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 1> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ugen1.2: <Realtek USB 10/100 LAN> at usbus1
ure0 on uhub0
ure0: <Realtek USB 10/100 LAN, class 0/0, rev 2.10/20.00, addr 1> on usbus1
miibus0: <MII bus> on ure0
rlphy0: <RTL8201E 10/100 media interface> PHY 0 on miibus0
rlphy0: OUI 0x00e04c, model 0x0008, rev. 2
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on ure0
ue0: bpf attached
ue0: Ethernet address: 00:e0:4c:36:00:01
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
lo0: link state changed to UP
ue0: link state changed to DOWN
ue0: link state changed to UP
usbhid0 on uhub1
usbhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 1> on usbus0
hidbus0: <HID bus> on usbhid0
hsctrl0: <vendor 0x413c Dell KB216 Wired Keyboard System Control> on hidbus0
hcons0: <vendor 0x413c Dell KB216 Wired Keyboard Consumer Control> on hidbus0
pci0: driver added
pci1: driver added
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
pci0:1:0:0: reprobing on driver added
em0: <Intel(R) PRO/1000 Network Connection> mem 0x40180000-0x4019ffff,0x40100000-0x4017ffff,0x401a0000-0x401a3fff at device 0.0 on pci1
em0: attach_pre capping queues at 2
ofw_pci mapdev: start 400180000, len 131072
em0: Setup of Shared code failed, error -2
em0: IFDI_ATTACH_PRE failed 6
device_attach: em0 attach returned 6
pci2: driver added
pci3: driver added
pci4: driver added
pci5: driver added
pci0: driver added
pci1: driver added
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
pci0:1:0:0: reprobing on driver added
em0: <Intel(R) PRO/1000 Network Connection> mem 0x40180000-0x4019ffff,0x40100000-0x4017ffff,0x401a0000-0x401a3fff at device 0.0 on pci1
em0: attach_pre capping queues at 2
ofw_pci mapdev: start 400180000, len 131072
em0: Setup of Shared code failed, error -2
em0: IFDI_ATTACH_PRE failed 6
device_attach: em0 attach returned 6
pci2: driver added
pci3: driver added
pci4: driver added
pci5: driver added