---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-STABLE #2: Sat Aug 21 01:27:37 MSK 2021
    root@baikal:/usr/obj/usr/src/arm64.aarch64/sys/BAIKAL arm64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1920x1080
real memory  = 8318550016 (7933 MB)
avail memory = 8075923456 (7701 MB)
Starting CPU 1 (1)
Starting CPU 1 (1) psci_cpu_on return (-9)
Starting CPU 1 (100)
Starting CPU 1 (100) psci_cpu_on return (-9)
Starting CPU 1 (101)
Starting CPU 1 (101) psci_cpu_on return (-9)
Starting CPU 1 (200)
Starting CPU 1 (200) psci_cpu_on return (-9)
Starting CPU 1 (201)
Starting CPU 1 (201) psci_cpu_on return (-9)
Starting CPU 1 (300)
Starting CPU 1 (300) psci_cpu_on return (-9)
Starting CPU 1 (301)
Starting CPU 1 (301) psci_cpu_on return (-9)
FreeBSD/SMP: Multiprocessor System Detected: 1 CPUs
random: unblocking device.
random: entropy device external interface
MAP 81000000 mode 2 pages 192
MAP fe510000 mode 2 pages 128
MAP fe590000 mode 2 pages 80
MAP fe5e0000 mode 2 pages 80
MAP fe640000 mode 2 pages 64
MAP fe700000 mode 2 pages 80
MAP fe750000 mode 2 pages 80
MAP fe7f0000 mode 2 pages 160
MAP fe890000 mode 2 pages 80
MAP ff1f0000 mode 2 pages 144
MAP ff290000 mode 2 pages 288
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed2: <Fixed clock> on ofw_clkbus0
clk_fixed3: <Fixed clock> on ofw_clkbus0
clk_fixed4: <Fixed clock> on ofw_clkbus0
clk_fixed5: <Fixed clock> on ofw_clkbus0
clk_fixed6: <Fixed clock> on ofw_clkbus0
clk_fixed7: <Fixed clock> on ofw_clkbus0
clk_fixed8: <Fixed clock> on ofw_clkbus0
clk_fixed9: <Fixed clock> on ofw_clkbus0
clk_fixed10: <Fixed clock> on ofw_clkbus0
clk_fixed11: <Fixed clock> on ofw_clkbus0
clk_fixed12: <Fixed clock> on ofw_clkbus0
clk_fixed13: <Fixed clock> on ofw_clkbus0
clk_fixed14: <Fixed clock> on ofw_clkbus0
clk_fixed15: <Fixed clock> on ofw_clkbus0
clk_fixed16: <Fixed clock> on ofw_clkbus0
clk_fixed17: <Fixed clock> on ofw_clkbus0
clk_fixed18: <Fixed clock> on ofw_clkbus0
clk_fixed19: <Fixed clock> on ofw_clkbus0
clk_fixed20: <Fixed clock> on ofw_clkbus0
clk_fixed21: <Fixed clock> on ofw_clkbus0
clk_fixed22: <Fixed clock> on ofw_clkbus0
clk_fixed23: <Fixed clock> on ofw_clkbus0
clk_fixed24: <Fixed clock> on ofw_clkbus0
clk_fixed25: <Fixed clock> on ofw_clkbus0
clk_fixed26: <Fixed clock> on ofw_clkbus0
clk_fixed27: <Fixed clock> on ofw_clkbus0
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
simplebus0: <Flattened device tree simple bus> on ofwbus0
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
dwgpiobus0: <Synopsys® DesignWare® APB GPIO BUS> mem 0x20200000-0x2020ffff irq 27 on simplebus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0x2d000000-0x2d00ffff,0x2d100000-0x2d2fffff irq 64 on simplebus0
its0: <ARM GIC Interrupt Translation Service> mem 0x2d020000-0x2d03ffff on gic0
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 50000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 50000000 Hz quality 1000
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
be_pvt0: <Baikal PVT Sensors> mem 0x28200000-0x2820ffff irq 22 on simplebus0
be_pvt1: <Baikal PVT Sensors> mem 0xc200000-0xc20ffff irq 23 on simplebus0
be_pvt2: <Baikal PVT Sensors> mem 0xa200000-0xa20ffff irq 24 on simplebus0
be_pvt3: <Baikal PVT Sensors> mem 0x26200000-0x2620ffff irq 25 on simplebus0
be_pvt4: <Baikal PVT Sensors> mem 0x2a060000-0x2a06ffff irq 26 on simplebus0
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
clk_fixed28: <Fixed factor clock> on ofw_clkbus0
clk_fixed28: Cannot FDT parameters.
device_attach: clk_fixed28 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cpu4: <Open Firmware CPU> on cpulist0
cpu5: <Open Firmware CPU> on cpulist0
cpu6: <Open Firmware CPU> on cpulist0
cpu7: <Open Firmware CPU> on cpulist0
pcib0: <Baikal PCI-E Controller> mem 0x2200000-0x2200fff,0x40100000-0x401fffff irq 16,17 on simplebus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pci1: <PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0x40100000-0x40103fff at device 0.0 on pci1
gpio0: <DesignWare General-Purpose I/O Interface> irq 104 on dwgpiobus0
port 0
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
uart0: <16550 or compatible> mem 0x20230000-0x2023ffff irq 33 on simplebus0
uart1: <16550 or compatible> mem 0x20240000-0x2024ffff irq 34 on simplebus0
be_dwc30: <Baikal DWC3> on simplebus0
xhci0: <Synopsys Designware DWC3> mem 0x2c400000-0x2c4fffff irq 107,108,109 on be_dwc30
xhci0: 64 bytes context size, 32-bit DMA
usbus0: trying to attach
usbus0 on xhci0
be_dwc31: <Baikal DWC3> on simplebus0
xhci1: <Synopsys Designware DWC3> mem 0x2c500000-0x2c5fffff irq 110,111,112,113,114,115,116,117,118 on be_dwc31
xhci1: 64 bytes context size, 32-bit DMA
usbus1: trying to attach
usbus1 on xhci1
ahci0: <AHCI SATA controller> mem 0x2c600000-0x2c60ffff irq 53 on simplebus0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahci1: <AHCI SATA controller> mem 0x2c610000-0x2c61ffff irq 54 on simplebus0
ahci1: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
dwc0: <Baikal Gigabit Ethernet Controller> mem 0x30240000-0x3024ffff irq 65 on simplebus0
dwc0: clk_set_assigned failed
miibus0: <MII bus> on dwc0
mcphy0: mcphy_probe called
mcphy0: OUI 0x00e04c, model 0x0011, rev. 5
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus0
rgephy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
dwc0: Ethernet address: 62:73:64:d5:01:df
dwc1: <Baikal Gigabit Ethernet Controller> mem 0x30250000-0x3025ffff irq 66 on simplebus0
dwc1: clk_set_assigned failed
miibus1: <MII bus> on dwc1
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus1
rgephy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
rgephy3: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus1
rgephy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
dwc1: Ethernet address: 62:73:64:e5:02:bc
armv8crypto0: CPU lacks AES instructions
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
ugen0.1: <Synopsys XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Synopsys XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
CPU  0: ARM Cortex-A57 r1p3 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <CRC32>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
Trying to mount root from zfs:zroot/ROOT/current []...
Root mount waiting for: usbus0 usbus1 CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SA400S37240G S3700100> ACS-3 ATA SATA 3.x device
ada0: Serial Number 50026B7783C5C4A3
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub1: 6 ports with 6 removable, self powered
ugen0.2: <PixArt Dell MS116 USB Optical Mouse> at usbus0
ugen1.2: <vendor 0x0424 product 0x2514> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 1> on usbus1
uhub2: MTT enabled
ugen0.3: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 2> on usbus0
kbd1 at ukbd0
uhub2: 4 ports with 4 removable, self powered
Warning: no time-of-day clock registered, system time will not be set accurately
lo0: link state changed to UP
dwc0: link state changed to DOWN
dwc1: link state changed to DOWN
dwc0: setting TX2 clock frequency to 250000000
dwc0: link state changed to UP
dwc1: setting TX2 clock frequency to 250000000
dwc1: link state changed to UP
ums0 on uhub0
ums0: <PixArt Dell MS116 USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
usbhid0 on uhub0
usbhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 2> on usbus0
hidbus0: <HID bus> on usbhid0
hsctrl0: <vendor 0x413c Dell KB216 Wired Keyboard System Control> on hidbus0
hcons0: <vendor 0x413c Dell KB216 Wired Keyboard Consumer Control> on hidbus0
Security policy loaded: MAC/ntpd (mac_ntpd)