Run FreeBSD on MOCHAbin #2
May 31st, 2022
Comments Off on Run FreeBSD on MOCHAbin #2
Second try UEFI in FDT mode..
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE #0 releng/13.1-n250148-fc952ac2212-dirty: Tue May 24 10:52:10 MSK 2022
xxx@xxx.xxx:/usr/crochet/work/obj/usr/crochet/src-release-13.1/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 13.0.0 (xxx@xxx.xxx:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT: init without driver.
module firmware already present!
module ure already present!
real memory = 8564830208 (8168 MB)
avail memory = 8321847296 (7936 MB)
Starting CPU 1 (1)
Starting CPU 2 (100)
Starting CPU 3 (101)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP bf810000 mode 2 pages 992
MAP bfde0000 mode 2 pages 512
MAP f2284000 mode 0 pages 1
MAP f2700000 mode 0 pages 1
MAP f93c0000 mode 0 pages 48
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on simplebus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
simplebus3: <Flattened device tree simple bus> on simplebus2
regfix0: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x6f4000-0x6f5fff on simplebus1
simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x6f8000-0x6f8fff on simplebus1
simple_mfd2: <Simple MFD (Multi-Functions Device)> mem 0x440000-0x441fff on simplebus3
simple_mfd3: <Simple MFD (Multi-Functions Device)> mem 0x400000-0x400fff on simplebus3
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
mv_ap806_clock0: <Marvell AP806 Clock Controller> mem 0x6f4000-0x6f5fff on simple_mfd0
mv_cp110_clock0: <Marvell CP110 Clock Controller> mem 0x440000-0x441fff on simple_mfd2
mv_cp110_icu_bus0: <Marvell Interrupt Consolidation Unit Bus> mem 0x1e0000-0x1e043f on simplebus3
gic0: <ARM Generic Interrupt Controller> mem 0x210000-0x21ffff,0x220000-0x23ffff,0x240000-0x25ffff,0x260000-0x27ffff irq 0 on simplebus1
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 352
gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x280000-0x280fff on gic0
gicv2m1: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x290000-0x290fff on gic0
gicv2m2: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x2a0000-0x2a0fff on gic0
gicv2m3: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x2b0000-0x2b0fff on gic0
mv_ap806_gicp0: <Marvell GICP> mem 0x3f0040-0x3f004f on simplebus1
mv_ap806_sei0: <Marvell SEI> mem 0x3f0200-0x3f023f irq 7 on simplebus1
mv_pinctrl0: <Marvell Pinctrl controller> mem 0x6f4000-0x6f5fff on simple_mfd0
mv_cp110_icu0: <Marvell Interrupt Consolidation Unit> mem 0x1e0000-0x1e043f on mv_cp110_icu_bus0
mv_cp110_icu1: <Marvell Interrupt Consolidation Unit> mem 0x1e0000-0x1e043f on mv_cp110_icu_bus0
generic_timer0: <ARMv8 Generic Timer> irq 1,2,3,4 on simplebus1
Timecounter "ARM MPCore Timecounter" frequency 25000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000000 Hz quality 1000
gpio0: <Marvell Integrated GPIO Controller> mem 0x6f4000-0x6f5fff on simple_mfd0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Marvell Integrated GPIO Controller> mem 0x440000-0x441fff irq 37,38,39,40 on simple_mfd2
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <Marvell Integrated GPIO Controller> mem 0x440000-0x441fff irq 41,42,43,44 on simple_mfd2
gpiobus2: <OFW GPIO bus> on gpio2
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
pmu0: <Performance Monitoring Unit> irq 5 on simplebus1
pmu0: Cannot get interrupt
device_attach: pmu0 attach returned 6
uart0: <16550 or compatible> mem 0x512000-0x5120ff irq 10 on simplebus1
uart0: console (114678,n,8,1)
sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0x6e0000-0x6e02ff irq 13 on simplebus1
mmc0: <MMC/SD bus> on sdhci_xenon0
gpioc0: <GPIO controller> on gpio0
mv_thermal0: <Marvell Thermal Sensor Controller> mem 0x6f8000-0x6f8fff irq 36 on simple_mfd1
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
rtc0: <Marvell Integrated RTC> mem 0x284000-0x28401f,0x284080-0x2840a3 irq 17 on simplebus3
rtc0: registered as a time-of-day clock, resolution 1.000000s
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
mv_thermal1: <Marvell Thermal Sensor Controller> mem 0x400000-0x400fff irq 45 on simple_mfd3
xhci0: <Generic USB 3.0 controller> mem 0x500000-0x503fff irq 18 on simplebus3
xhci0: 32 bytes context size, 32-bit DMA
usbus0 on xhci0
xhci1: <Generic USB 3.0 controller> mem 0x510000-0x513fff irq 19 on simplebus3
xhci1: 32 bytes context size, 32-bit DMA
usbus1 on xhci1
ahci0: <AHCI SATA controller> mem 0x540000-0x56ffff irq 20 on simplebus3
ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
twsi0: <Marvell Integrated I2C Bus Controller> mem 0x701000-0x70101f irq 21 on simplebus3
iicbus0: <OFW I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0x72
twsi1: <Marvell Integrated I2C Bus Controller> mem 0x701100-0x70111f irq 22 on simplebus3
iicbus1: <OFW I2C bus> on twsi1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0xc8
uart1: <Non-standard ns8250 class UART with FIFOs> mem 0x702000-0x7020ff irq 23 on simplebus3
pcib0: <Marvell Armada8K PCI-E Controller> mem 0xf2640000-0xf264ffff,0xf8f00000-0xf8f7ffff irq 16 on simplebus2
pcib0: Cannot get phy[0]
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pcib0: failed to reserve resource for pcib1
pcib1: failed to allocate initial I/O port window: 0-0xfff
pcib0: failed to reserve resource for pcib1
pcib1: failed to allocate initial memory window: 0-0xfffff
pcib0: failed to reserve resource for pcib1
pcib1: failed to allocate initial prefetch window: 0-0xfffff
pci1: <PCI bus> on pcib1
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
ugen1.1: <Generic XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Generic XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <SMSC USB5434> at usbus0
uhub2 on uhub1
uhub2: <SMSC USB5434, class 9/0, rev 3.00/41.00, addr 1> on usbus0
uhub2: 4 ports with 4 removable, self powered
mmc0: Failed to set VCCQ for card at relative address 2
mmcsd0: 16GB <MMCHC DF4016 0.1 SN F174770C MFG 03/2019 by 69 0x0000> at mmc0 50.0MHz/4bit/65535-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 4MB partition 3 at mmcsd0
Trying to mount root from zfs:zroot/ROOT/default []...
CPU 0: ARM Cortex-A72 r0p1 affinity: 0 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU 1: ARM Cortex-A72 r0p1 affinity: 0 1
CPU 2: ARM Cortex-A72 r0p1 affinity: 1 0
CPU 3: ARM Cortex-A72 r0p1 affinity: 1 1
Release APs...ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <NT-256 SN9596> ACS-4 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
done
GEOM: mmcsd0: the primary GPT table is corrupt or invalid.
GEOM: mmcsd0: using the secondary instead -- recovery strongly advised.
ugen0.3: <Realtek USB 10/100/1G/2.5G LAN> at usbus0
usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored)
Root mount waiting for: usbus0
usbd_set_config_index: could not read device status: USB_ERR_STALLED
ugen0.4: <SMSC USB2134> at usbus0
uhub3 on uhub1
uhub3: <SMSC USB2134, class 9/0, rev 2.10/41.00, addr 3> on usbus0
uhub3: MTT enabled
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
Dual Console: Serial Primary, Video Secondary
lo0: link state changed to UP
cdce0 on uhub2
cdce0: <CDC Communications Control> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: xx:xx:xx:xx:xx:xx
ue0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)